Firmware Version History
Current firmware: v0.7.7.7-7a. The release notes below reflect the versions documented in this theme's changelog.
v0.7.7.7-7a — National CWA-inspired footer refinement
- Widened the modern CWA footer content area and balanced the branding block against a three-column navigation area on large desktops, matching the national CWA footer’s overall proportions.
- Normalized footer heading, location/anniversary, search label, parent menu links and nested menu links with consistent Roboto typography and lighter menu weights.
- Preserved the single editable WordPress menu and its hierarchy. Each parent stays with its child links as the navigation flows across columns.
- Responsive layout: two navigation columns at medium widths, stacked branding/navigation on tablets, and a single navigation column on phones.
- Preserved the diagonal red graphic, configurable footer content, social links, search, copyright, firmware history link, signed-in π command toggle, and terminal appearance.
- Preserved the previously requested divider-free copyright area.
v0.7.7.7-6a — Editable unified CWA navigation
- The CWA top and bottom navigation now render from the same editable WordPress menu (Terminal Main Menu location).
- Each menu item has independent Show in CWA top / Show in CWA bottom checkboxes; both enabled by default.
- The first administrator visit seeds a CWA Main Navigation menu from the old fallback links only if no menu is assigned, leaving existing unassigned menus untouched.
- Added Appearance → CWA Menus with a direct Edit CWA Navigation Menu link and explanatory guidance.
- Main Menu is editable in the CWA menu; the retro terminal keeps its built-in [0] Main Menu without duplication.
- Existing menu labels, order, URLs, and login/logout behavior are preserved and managed via WordPress menu editing.
v0.7.7.7-5 — Smart image optimization and cleaner featured images
- Corrected modern CWA appearance featured-image rendering: remove terminal CRT sepia/grayscale/brightness filter, border, dark padding, and scanline overlay; retain retro effects in terminal appearance.
- Added independent **Hide displayed page/post title** editor checkbox on both posts and pages. WordPress title, SEO/browser metadata, and independently configured red/gray bands remain intact. H1 is visually hidden, not removed from accessibility structure, in modern CWA mode.
- Added **Media → CWA Image Optimizer** with Balanced (WebP quality 82), Maximum Compression (quality 72), and Lossless WebP presets, configurable output WebP or AVIF when Imagick codec is supported, optional maximum image width (1920 px default), and optional approximate target KB (quality floor 50).
- Added **Smart Optimize** actions in Media Library list, attachment editor/media modal, and bulk media actions (up to 50 items per batch). Generates separately registered optimized media attachments, preserving originals, captions, descriptions, alt text, ICC color profiles, and source/result size metadata. Does not replace featured-image references automatically.
- Existing **Create lossless WebP copy** action is preserved for backwards compatibility. WebP/AVIF encoder support depends on the host's Imagick build. Results and size reductions vary by source; optimization skips output larger than its source.
v0.7.7.7-4 — Footer layout, latest posts, lossless WebP
- CWA website footer now stays at the bottom of short browser pages by stretching the content area (not fixed/overlaid).
- Removed the thin separator above the copyright/firmware row, preserving the angled red footer background.
- Added Latest News & Updates immediately above the footer, with featured-image cards in a three-column desktop layout and a stacked mobile layout. Replaces the earlier homepage-only six-post news block to prevent duplicates.
- Theme Preferences > Latest News & Updates: enable/disable, homepage-only (default) or sitewide, editable heading, and post count (1–9, default 3).
- Each page/post has a CWA Latest News Display metabox with an override to hide the section on that record.
- Extended the CWA red title and gray subtitle band editor options to WordPress posts as well as pages.
- Media Library list view, attachment details, and bulk actions now offer a non-destructive lossless WebP conversion for JPEG and PNG media; creates a separate media attachment and retains the original. Requires Imagick with WebP support on the server. WordPress-generated derivative thumbnails may use standard compression.
v0.7.7.7-3 — Carousel navigation visibility preferences
- Add Appearance > Customize > CWA Homepage Slider > Show carousel navigation controls, enabled by default for desktop, and Hide carousel navigation controls on phones, enabled by default.
- On phones (up to 767px wide), hide the previous/next/pause/slide-count bar when the mobile preference is enabled and reclaim its reserved overlay spacing for the slide content. The desktop carousel is unchanged.
- Autoplay remains functional when the controls are hidden. With autoplay disabled and navigation hidden, only the initial slide will be visible until controls are re-enabled.
- Retain existing slide media, page banners, CWA appearance, and terminal functionality.
v0.7.7.7-2 — Footer firmware label and browser icon preference
- Replace the long modern CWA footer firmware/version-history text with a small, light-gray `FW v0.7.7.7-2` link anchored to the bottom-right of the footer, independently of the centered copyright line. The link still opens the complete firmware history.
- Add Appearance > Customize > Theme Appearance > Browser tab icon (favicon), allowing an optional square image upload from Media Library for both appearances. The existing WordPress Site Identity icon remains the fallback when the theme icon is unset.
- Keep terminal appearance, existing content modules, and CWA footer branding unchanged.
v0.7.7.7-1 — Homepage media carousel, page title bands, and firmware history
- Added an optional homepage media carousel with up to three image or MP4 slides selected from the WordPress Media Library through Appearance > Customize > CWA Homepage Slider.
- Configurable slide titles, descriptions, buttons, destinations, autoplay interval, pause/next/previous controls, reduced-motion support, and inline muted video playback. When no slide is configured, the previous static homepage hero remains unchanged.
- Added per-page CWA Page Header Settings in the WordPress page editor: optional full-width red H1 title band and light-gray H2 subtitle band, with custom text and italic subtitle option. Homepage bands follow the carousel; other page bands follow navigation.
- Added a public firmware history screen based on the bundled CHANGELOG.md, linked from the modem firmware readout, terminal footer, and CWA website footer. Older versions are listed as documented; missing versions are not fabricated.
- Preserved terminal styling and all existing member tools.
v0.7.7.7 — CWA footer design and preferences
- Match CWA-inspired website link styling with Roboto Medium, no underlines, and visible keyboard focus. Retro terminal remains unchanged.
- Reorganize the CWA website footer: optional uploaded footer brand graphic in place of text heading; editable heading, location, anniversary, link labels, search labels, and copyright through Appearance > Customize > CWA Website Footer. Existing brand settings remain the fallback.
- Move the footer search below the brand/social block, using a black magnifying-glass submit button and responsive full-width field.
- Retain angled darker-red footer, configured social icons, and signed-in π command toggle.
- Normalize website button styling without touching feature handlers.
v0.7.7.6 — CWA website search toggle fix
- Replaced the native search `<details>` disclosure with an explicitly controlled button and hidden search form to prevent the panel remaining visible or rendering over the masthead after a second tap on mobile Safari.
- Search now closes consistently on a second tap, outside tap, Escape, or appearance change, with proper `aria-expanded` state and no layout shift.
- Terminal appearance and all other features unchanged.
v0.7.7.5
- Raise the floating terminal settings cog 20 CSS pixels so it sits comfortably in the header instead of overlapping the CRT top border.
- Preserve absolute positioning, existing button styling, and both appearance modes without altering layout dimensions.
v0.7.7.4
- Harmonize typography in the CWA website appearance using Roboto with consistent weights, headings, body text, navigation, and footer.
- Normalize the three-line logo text and improve mobile hero headline wrapping and spacing.
- Keep the information terminal appearance and functional modules unchanged.
v0.7.7.3
- CWA appearance: hide redundant SUBSYSTEM/RECORD labels and divider, reduce masthead/page spacing, move page title and content higher.
- CWA message board: add visible Post New Message action (including for anonymous visitors, subject to posting settings).
- Events list: include past events in the current month, shown muted/gray and still accessible for details/minutes.
- Events list: add Next Month, and Current/Previous Month navigation as appropriate; retain existing 12-month preference and calendar views.
- Terminal appearance and message storage/moderation behavior are unchanged.
v0.7.7.2
- Use equal font size, weight, color and line spacing for all three CWA logo text lines, without a gap after the local number.
- Remove the redundant Public message board link from the CWA appearance's top red utility bar; the menu and footer links remain.
- Preserve the search, settings cog, footer, console, and terminal appearance from v0.7.7.1.
v0.7.7.1
- CWA-style website logo text now uses matching dark-grey Roboto SemiBold type for the Local name and federation subtitle, following the national CWA branding reference while preserving uploaded logo media.
- Converted the full utility-bar search field into a right-aligned magnifier disclosure, with accessible search form on activation, native no-JavaScript fallback, Escape/outside closing when JavaScript is available.
- Restyled CWA-style footer with angled darker-red overlay and white links; terminal appearance remains unchanged.
- Hid the CWA-view terminal command console by default for everyone. Signed-in users can open and close it with a subtle π control in the CWA footer. Guests cannot open it. Existing terminal-mode commands are unaffected.
v0.7.7
- Styled CWA website logo-adjacent text with Roboto SemiBold (600), red title, gray subtitle, improved tracking and spacing, responsive mobile sizing.
- Added customizable optional Facebook, X/Twitter, YouTube, Instagram, TikTok, Bluesky and LinkedIn profile links to the CWA top utility bar.
- Social icons only appear for valid configured profile URLs; inline SVGs require no plugin or bundled icon font.
- Added a compact search form to the CWA website top bar, using WordPress native search for published pages and posts, and a responsive search-results template.
- Retained terminal styling and existing settings cog behavior.
v0.7.6
- Display the standard settings cog in the CWA website appearance's existing utility bar, with white-on-red styling and no additional header height.
- Add Theme Appearance > Show settings cog (Terminal and CWA website), enabled by default.
- Hide terminal, CWA, and maximized settings controls when the option is disabled.
- Preserve the floating terminal cog positioning from v0.7.5.
v0.7.5
- Corrected the stylesheet cache version constant, which had remained at 0.7.2 and could cause the v0.7.4 cog to appear in the upper-left corner and add unwanted spacing.
- Anchored the compact, borderless settings gear absolutely to the upper-right of the terminal chassis, outside the layout flow, with a small in-page fallback style for cached CSS.
- Hide the regular cog in maximized and union modes; retain the dedicated fullscreen settings control.
v0.7.4
- Floated the settings cog directly over the terminal chassis rather than placing it inside the header flex layout; the cog no longer consumes header height or pushes the CRT border down on mobile.
- Removed the cog's outer circle, border, and background, replacing it with a compact standard gear icon.
- Kept the settings modal, keyboard focus, and maximized-terminal control behavior unchanged.
v0.7.3
- Reduced the settings cog to an icon-only control without the circular button outline so it no longer stretches or visually distorts the terminal header/border area.
- Kept the settings control aligned in both normal and maximized terminal modes while preserving keyboard accessibility.
0.7.2
- Replaced header appearance dropdowns with a settings cog and a shared accessible modal. The overlay contains appearance, terminal fullscreen, and native WordPress login/logout links; it remains available while the terminal is maximized.
- Added keyboard focus wrapping, Escape/backdrop/close-button dismissal, focus restoration, and guards so terminal shortcuts do not intercept settings interactions.
- Added a website-specific image logo and editable adjacent title/subtitle in Theme Appearance. Existing Site Identity logo/CWA wordmark and brand-name defaults are preserved.
- Added an optional setting to hide the entire CWA-style command console for logged-out visitors. Logged-in visitors and terminal appearance retain their console; WordPress access permissions are unchanged.
- Added a configurable terminal prompt label used for entry, command history, and restoration after credential prompts. Labels are plain text, limited to 32 characters, and retain the existing default when blank.
- Preserved v0.6.6 security fixes and the v0.7.1 dual-appearance behavior.
0.7.1
- Integrated the dual-appearance v0.7.0 feature into the v0.6.6 security baseline. Preserved narrow event permissions, shared order lookup throttling, sensitive-response cache controls, and explicit transcript withdrawal.
- Added the CWA-style website presentation alongside the existing terminal, with a Customizer default and optional remembered visitor preference. Upgrades continue to default to terminal.
- Added responsive website navigation, homepage, news, and footer over the same WordPress records and feature handlers. Switching preserves drafts without reloading or submitting forms.
- Labeled homepage/header/footer message-board destinations as public and clarified that confidential information should not be posted there.
- Preserved terminal keyboard handling while allowing native website keyboard navigation outside the console. No authentication or 2FA changes.
0.6.6
- Restricted native WordPress event administration to the same narrow event-management capability used by the terminal.
- Applied the shared order lookup limit to confirmation URLs as well as tracking; successful lookups no longer reset the attempt budget.
- Added private/no-store response headers and page-cache opt-out for authenticated pages and all Order Entry pages, plus no-store headers for theme REST responses.
- Added an explicit original-TXT withdrawal confirmation. Removing/replacing minutes with an original requires confirmation; withdrawing just the original preserves edited minutes. File ownership/type checks and deletion-failure reporting protect unrelated media and preserve retry information.
- Clarified that original uploads are public and editing displayed minutes does not redact the downloadable original.
- No authentication/2FA changes. Existing public downloads, old orphan uploads, backups, and external cached/downloaded copies require separate review.
0.6.5
- Added occurrence-specific meeting minutes to the Upcoming Events subsystem so each monthly meeting can have its own minutes even when one occurrence is moved.
- Admin/President/Executive Officer event managers can paste/edit minutes or upload a Zoom `.txt` transcript (max 2 MB). Uploaded text is imported into the terminal-readable minutes record and the original TXT can also be downloaded.
- Added public `VIEW MEETING MINUTES` links on event records when minutes exist.
- Added a public `MEETING MINUTES` archive view listing all event occurrences that currently have stored minutes.
- Added responsive terminal styling for long minutes/transcripts with wrapped text and no horizontal scrolling.
- Added controls to edit or remove an occurrence's existing minutes.
0.6.4
- Reworked Order Entry product cards on desktop into compact full-width rows with a medium thumbnail and product information beside it; mobile remains responsive.
- Added a privacy-safe 7-digit customer order lookup code generated for each order.
- Added public order-status lookup from Order Entry and terminal commands such as `track 4827316` and `order status 4827316`.
- Added restricted carrier/tracking-number fields for Administrators and President accounts, plus SHIPPED/PROCESSING/READY order states.
- Added customer-safe status output showing product, quantity, order state, carrier, and carrier tracking number without exposing contact information.
- Added WordPress email hooks for order confirmation/lookup code and shipping tracking updates. Mail delivery uses `wp_mail()` and will begin working automatically once host mail/SMTP is configured.
0.6.3
- Added optional cPanel/Namecheap AWStats integration using the account's existing AWStats aggregate data files; no cPanel credentials are stored in WordPress.
- Added `awstats`, `stats awstats`, `stats history`, and month-specific AWStats terminal output.
- `stats` now keeps the theme-local per-page counters and, when available, also shows a current-month AWStats summary.
- Added Terminal Settings controls to enable/disable AWStats reading and optionally override the AWStats domain name.
- Only aggregate counters are exposed to the terminal; raw IP addresses, user-agent records, and raw access logs are never exposed.
0.6.2
- Added `fullscreen` / `fs` commands with ON, OFF, and TOGGLE behavior using the same persistent display mode as the four-way-arrow control.
- Added `stats`, `visits`, and `pageviews` commands.
- Added lightweight aggregate per-page and site-wide page-view counters with no persistent visitor identity/IP/fingerprint data.
- Statistics identify themselves as local counters beginning with v0.6.2; host analytics remain the better source for historical/unique-visitor reporting.
0.6.1
- Added a WordPress-backed **Order Entry** subsystem available to public visitors.
- Added terminal product browsing with product picture, description, price, size/option choices, and quantity selection.
- Added public order-request submission with name, email, phone, optional notes, server-side validation, honeypot protection, and short privacy-preserving rate limiting. No payment credentials are collected.
- Added restricted Product Manager and Orders views for Administrators and President-role accounts only.
- Added terminal product create/edit/trash controls including image upload, sizes/options, price, maximum quantity per order, and availability.
- Added restricted order detail/status controls with NEW / REVIEWED / FULFILLED / CANCELLED states and WordPress Trash support.
- Added an `Order Entry` page/menu seeder and WordPress admin shortcuts for Product Manager and Orders.
- Added `order`, `shop`, `products`, `orders`, `product ...`, `RTRV-PROD`, `RTRV-ORD`, and `ENT-ORD` terminal commands.
- Replaced the always-visible command prompt with a **static navigation dock by default**. Interior `[ESC] BACK`, `[0] RETURN TO MAIN MENU`, and page-specific bottom actions now remain fixed in this dock.
- Added a persistent **π command control** that reveals/hides the command prompt and command-history drawer.
- Added a Terminal Settings option, **Show command prompt by default**, allowing the site-wide default to be command prompt or navigation dock.
0.5.2
- Added a Terminal Settings option for the Upcoming Events list range.
- `This Month` is now the default and shows events from today through the end of the current month.
- `Next 12 Months` preserves the previous long-range list behavior.
- Calendar View remains month-by-month.
0.5.1
- Added per-occurrence exceptions for recurring events. An officer can move or edit one meeting date/time/location/details without changing the recurring series.
- Added `EDIT / MOVE THIS OCCURRENCE` on recurring event records and `RESET THIS OCCURRENCE` for overridden dates.
- Recurring monthly-weekday series now display a specific rule such as `MONTHLY — SECOND TUESDAY` when derived from the series start date.
- Moved occurrences are generated on their override date while the original recurring slot is suppressed; later months continue following the original series rule.
- Reworked the calendar to scale to the CRT width with seven fluid columns instead of forcing a minimum desktop width.
- Added compact mobile weekday labels, event-title truncation, fluid cell sizing, and overflow guards to avoid horizontal scrolling.
- Hardened event forms for narrow/mobile CRTs so date/time/select/textarea controls shrink within the terminal instead of overflowing.
0.5.0
- Added a WordPress-backed **Upcoming Events** terminal subsystem with public read-only access.
- Added list and month-calendar views inside the CRT.
- Added terminal event create/edit/trash forms for Administrators, President, and Executive Officer roles.
- Added recurring series support: weekly, monthly by date, monthly by weekday position, and yearly, with optional end date.
- Added `events`, `calendar`, `event new`, `event <record>`, `event edit <record>`, `event delete <record>`, `RTRV-EVT`, and `ENT-EVT` commands.
- Added a private `Local Events` WordPress admin record type as a fallback management interface.
- Added a one-time seed for the `Upcoming Events` page and, when a custom Terminal Main Menu is already assigned, a one-time menu item addition.
- Updated the built-in fallback main menu to **About, Message, Documents, Upcoming Events, Login/Log Out**.
0.4.9-1
- Clarified message-board reply-count badges by displaying `REPLIES: N` instead of a bare number.
- Preserved officer/high-priority badge colors and hid badges when reply count is zero.
0.4.9
- Renamed the default chassis title to `CWA LOCAL 13552 - INFORMATION TERMINAL`.
- Removed the NODE label from the visible status/breadcrumb line to preserve portrait-width space for PATH and USER information.
- Added a Terminal Settings `Main Menu Page` selector; `[0] RETURN TO MAIN MENU`, `HOME`, `MAIN`, login/logout returns, and fallback navigation now use that configured destination.
- Made the configured Main Menu page the breadcrumb/session-history root. Returning to it resets the visible PATH to `MAIN MENU`, preventing stale paths such as `ABOUT > HOME`.
- Breadcrumbs now derive their current record from the actual requested page rather than a hard-coded HOME prefix.
0.4.8
- Preserve terminal display maximize mode across normal WordPress page navigation for the current browser/tab session.
- Restoring the display clears the remembered maximized state, so later navigation stays in normal mode.
0.4.7
- Fixed the CRT maximize/restore control being covered by higher-z-index terminal content, making clicks unreliable.
- Enlarged the light-gray pixel fullscreen icon and removed its visible button border/background while preserving a large click/tap target.
- Added a Terminal Settings option to show the header SOUND ON/OFF button; the control is hidden by default.
- SOUND, MUTE, and UNMUTE commands continue to work even when the visual sound button is hidden.
0.4.4
- Interior terminal records now open scrolled to the top instead of jumping to bottom navigation controls.
- Local page actions no longer preselect during initial render; the first arrow key press establishes selection.
- Internal CRT scroll position is reset after layout and on browser page-show events, while URL hash navigation is preserved.
0.4.3
- Restore Gutenberg/classic content alignment inside the CRT, including left/right image floats with paragraph wrapping.
- Preserve centered, wide, and full-width image behavior without overflowing the terminal display.
- Add terminal-friendly support for captions, Columns, Media & Text, blockquotes, lists, and separators.
- Stack floated/media layouts on narrow screens to keep mobile text readable.
0.4.2
- Fixed officer reply visibility by making the Message page/comment relationship the source of truth; terminal rendering no longer requires private theme metadata to exist.
- Added detailed sanitized `REPLY_*` diagnostic events so failed officer replies can be distinguished from display/sync problems.
- President/Executive Officer roles are recognized directly for message moderation even before a role-editor plugin has copied the custom capability.
- Comments and replies created from the normal WordPress Comments UI now appear automatically in the terminal message board.
- WordPress-admin-created officer replies inherit role-aware `ADMIN REPLY`, `OFFICIAL REPLY FROM PRESIDENT`, or Executive Officer identity and participate in officer pinning/President-replied indicators.
- Added support for nested WordPress comment replies by flattening them into chronological terminal subrecords under the correct top-level message record.
- Individual direct or nested reply subrecords can be edited or moved to WordPress Trash from the terminal by authorized moderators.
- Reply action labels now include the exact subrecord identifier being edited/trashed.
0.4.1
- Added moderator editing for individual top-level message records and individual reply subrecords.
- Added per-reply Move to Trash controls without removing the parent thread.
- Displayed every reply as a thread-local subrecord such as `0021.01`, while preserving chronological subrecord numbering even when officer replies are pinned.
- Pinned President replies first and Executive Officer replies second in the reply display.
- Added `PRESIDENT REPLIED` indicators on message detail and message-board list entries when an approved President reply exists.
- Added `login window` (also `login wp` / `login wordpress`) to open the normal WordPress login form in a popup so browser password managers can save/fill credentials.
- Preserved the secure in-terminal `login` flow as the default.
0.4.0 — Terminal authentication and password changes
- Added a native terminal login flow: `login` and the Login menu item prompt for username and password directly inside the CRT instead of redirecting to `wp-login.php`.
- WordPress still performs authentication server-side with `wp_signon()`; the theme never hashes or validates passwords in JavaScript.
- Password input is masked and credential values are never written to terminal history, debug logs, localStorage, or sessionStorage.
- Added short server-side rate limiting and same-origin/nonce validation for terminal login attempts.
- Added `passwd`, `password`, and `change password` commands for authenticated users.
- Password changes require the current password, a new password, and confirmation; the new password must be at least 8 characters.
- Successful password changes end the current WordPress session and return the visitor to the terminal to log in again.
- Escape cancels either credential workflow and securely clears the temporary in-browser values.
- The normal WordPress Login URL remains the no-JavaScript fallback for the Login menu item.
0.3.9 — Recoverable message trash
- Moderator delete now moves the parent terminal message and its terminal replies to WordPress Comments → Trash instead of permanently deleting them.
- Updated the moderator action and confirmation UI to say `MOVE TO TRASH` / `CONFIRM TRASH`.
- After the action, the terminal reports `MESSAGE RECORD MOVED TO TRASH.`
- Trashed records can be restored or permanently deleted later from WordPress → Comments → Trash.
0.3.8 — Role-aware official replies
- Administrator/sysop replies now display as `ADMIN REPLY`.
- President-role replies display as `OFFICIAL REPLY FROM PRESIDENT`.
- President replies use a slow red-to-dark-red pulsing callout; reduced-motion users get a static red callout.
- Exec Officer / Executive Officer roles display as `OFFICIAL REPLY FROM EXECUTIVE OFFICER`.
- Reply type and label are saved as comment metadata at posting time so old replies retain their original classification if roles later change.
- Existing President and Exec Officer role slugs receive the narrow `moderate_local_messages` capability automatically when present.
0.3.7 — Collapsible/resizable command history
- Command history now starts collapsed when empty, leaving only a compact history bar and the pinned command-entry row.
- The first transcript output automatically expands the history drawer.
- Added a top-right ▲/▼ toggle to expand/collapse command history.
- Added a draggable top resize edge; dragging upward increases history space and dragging downward decreases it.
- Remembers the preferred expanded history height locally while keeping each fresh page collapsed until output appears.
- `CLEAR`/`CLS` clears and collapses the history drawer again.
0.3.6 — Message diagnostics and same-origin submission fix
- Added an Administrator-only `debug` terminal command with a sanitized message-subsystem event log.
- Added `debug clear` to erase the diagnostic ring buffer and last browser-side message error.
- Message diagnostics never store message bodies, raw IP addresses, cookies, passwords, nonces, or user-agent strings.
- Message forms now submit to a same-origin relative `admin-post.php` endpoint to avoid proxy/SSL scheme mismatch failures.
- Removed the unnecessary custom fetch header from message submissions.
- Replaced the post-message nonce hard-stop with an explicit logged/redirected error so expired sessions return to the terminal instead of a WordPress error page.
- Administrators now see the actual HTTP status and a short sanitized response excerpt when a message POST fails.
- Added server-side logging for post start, validation rejection, comment insertion, redirects, and caught exceptions.
0.3.5 — Centered public-access boot screen + message transmit recovery
- Centers the boot dialog against the dynamic viewport on mobile and desktop, including iOS safe-area handling.
- Keeps the startup sequence through `CONNECT 115200`, then shows a generic public-access warning instead of the Local/date/firmware block.
- Uses a 303 POST/Redirect/GET response for message mutations and removes double-encoding from message redirect query arguments.
- Adds a server-side redirect fallback page so a host/plugin that prevents normal redirect headers cannot leave the visitor on a blank `admin-post.php` response.
- Message submit/moderation forms now use a same-origin fetch guard when JavaScript is available and explicitly navigate back to the terminal after a successful response; no-JavaScript native POST remains supported.
0.3.4 — Page title suppression
- Suppresses the visible WordPress page title on standard terminal Pages (including About, Documents, Officers, and other Pages) while preserving an accessible H1 for screen readers and document semantics.
- Keeps the terminal-owned `RECORD:`/subsystem label as the visible page identifier, eliminating redundant duplicate headings.
- Preserves the custom home-screen heading, 404 heading, post/article headings, and all v0.3.3 message-board behavior.
0.3.3 — Message board footer action + heading suppression
- Suppresses the normal visible WordPress page title on the Message subsystem while keeping an accessible H1 for screen readers.
- Moves `[1] NEW MESSAGE` into the Message board's bottom action row beside `[ESC] BACK` and `[0] RETURN TO MAIN MENU`.
- Message records begin at `[2]` so the New Message key remains stable even though the action is visually at the bottom.
- Adds the reusable Gutenberg CSS class `terminal-hidden` for intentionally hiding individual blocks from the terminal frontend.
0.3.2 — Main-menu boot guard
- Added `[0] MAIN MENU` as the first selectable record on the terminal home screen while preserving the existing WordPress menu numbering beginning at `[1]`.
- Added direct `0`, `main`, `main menu`, and `home` routes back to the terminal root where they do not conflict with an interior page's local `[0]` return control.
- Fixed the initial boot-screen Enter event leaking through to the highlighted menu underneath; Enter now dismisses the boot overlay without immediately opening About.
- Preserved all v0.3.1 message-board, navigation, authentication, and layout behavior.
0.3.1 — Message Board v1
- Message textarea inset 4px on both sides and uses border-box sizing to prevent clipping.
- Left/Right arrow keys now navigate terminal choices along with Up/Down.
- Added a WordPress-backed terminal message board for the Page slug `message`.
- Guests can post without an account, name, or email and are displayed as `ANONYMOUS`.
- Logged-in posters automatically use their WordPress display name.
- Messages and official replies include site-local timestamps.
- Added moderator actions: Acknowledge, Official Reply, and Delete with a separate delete-confirmation screen.
- Added the narrow `moderate_local_messages` capability; Administrators receive it automatically and individual officer accounts can be granted it from the WordPress user profile.
- Stored board records as ordinary WordPress comments so administrators can also manage them from the standard Comments screen.
- Added anonymous-posting and hold-for-moderation settings under Appearance → Customize → Terminal Settings.
- Added nonce validation, a hidden honeypot, server-side sanitization, a 1000-character limit, and short rate limiting for public posting.
- Anonymous message records do not persist the visitor IP or browser User-Agent in comment data; a salted transient hash is used only for rate limiting.
- Extended local terminal selection to form buttons, allowing moderator actions and transmit buttons to work with Up/Down + Enter and numeric selection.
- Added `message new`, `message <record>`, `RTRV-MSG::ALL;`, `RTRV-MSG::<record>;`, and `ENT-MSG;` command shortcuts.
0.2.9-2
- Made `[ESC] BACK` a first-class selectable local terminal choice.
- Up/Down now moves through BACK and `[0] RETURN TO MAIN MENU` instead of skipping BACK.
- Enter on the highlighted BACK choice performs browser-history Back, with the home screen as fallback.
- Styled the `[ESC]` marker with the same red terminal-choice marker used by numbered items.
0.2.9-1
- Expanded the automatic interior-page navigation row to show `[ESC] BACK [0] RETURN TO MAIN MENU`.
- The Back control is clickable and mirrors the Escape-key behavior; if there is no useful prior browser entry, it falls back to the terminal home screen.
- Preserved the existing zero-key main-menu behavior, local page-link navigation, and v0.2.9 console sizing.
0.2.9
- Added an automatic `[0] RETURN TO MAIN MENU` choice at the bottom of normal interior pages/posts.
- The return choice participates in the same local page navigation as document links: Up/Down + Enter, click/tap, the `0` key, or typing `0` at the command prompt.
- The 404 page keeps its existing dedicated return control and does not receive a duplicate `[0]` link.
- Reduced the command console from the v0.2.8 maximum of 190px to 130px, leaving the 50–58px input strip unchanged and reducing the visible transcript/history area by roughly half on desktop.
- Preserved internal transcript scrolling, local document numbering, and the fixed-bottom command entry.
0.2.8
- Added automatic terminal numbering for ordinary links inside WordPress page/post content.
- Page links render as `[1]`, `[2]`, `[3]`, etc. without requiring the editor to type the numbers manually.
- On content pages, Up/Down selects the local numbered links and Enter opens the highlighted link.
- Number keys 1-9 open the matching local link when the command input is not active.
- Typing a local link number into the command line (including multi-digit numbers such as `10`) opens that link.
- Local page-link numbers take precedence over main-menu numbers while viewing that page, preventing `1` on Documents from unexpectedly opening the site's About menu item.
- Gutenberg File blocks are de-duplicated so their separate Download button does not become a second numbered record.
- Added `terminal-no-select` as an opt-out class for links that should not participate in terminal numbering/navigation.
0.2.7
- Changed the built-in default menu to **About, Message, Documents, Login/Log Out**.
- Menu item 4 is session-aware: public visitors see **Login**; authenticated WordPress users see **Log Out**.
- Selecting item 4 uses WordPress's native login/logout URLs and nonce-protected logout flow.
- A configured WordPress menu item named/commanded Login or Logout is also automatically rendered for the current authentication state.
- The `login` command now reports an already-authenticated session instead of sending a logged-in user back to the login screen.
0.2.6
- Fixed the hidden-CRT-header grid regression that could make the command entry appear to vanish.
- Explicitly pins the optional CRT brand header to row 1, WordPress content to row 2, and the terminal console to row 3.
- The command console now remains in the bottom CRT track whether the brand header is on or off.
- Preserves the full-height clickable input strip and internal transcript scrolling from v0.2.5.
0.2.5
- Fixed the v0.2.4 command input regression where the visible text field could collapse to a thin strip.
- Reserved a dedicated 50–58px command-entry track at the bottom of the CRT.
- Made the actual text input fill the full height and width of the entry row.
- Kept the entire entry strip clickable/tappable and preserved the pinned-bottom console behavior.
- Kept transcript scrolling independent from the command-entry row.
0.2.4
- Made the command console occupy an explicit bottom CRT grid track so it remains physically pinned to the bottom even when page content is very short.
- Kept the transcript scrollable inside that fixed console area.
- Increased the command-entry row to a touch-friendly target and made the entire row clickable/tappable to focus the command input.
- Added subtle hover/focus feedback to the command-entry surface without changing the terminal aesthetic.
- Preserved the real input caret and all v0.2.3 status/header behavior.
0.2.3
- The three-line brand/header block inside the CRT is now hidden by default, freeing more screen space for page/menu content.
- Added `header on`, `header off`, and `header default` terminal commands (`screenheader` is also accepted).
- Header visibility preference is stored locally in the visitor's browser.
- Added **Show CRT brand header by default** under Appearance → Customize → Terminal Settings for a site-wide default.
- The chassis title and dynamic `statusbar` remain independent and unchanged.
0.2.2
- Added editable home-screen and terminal-brand text under Appearance → Customize → Terminal Settings.
- Added dynamic firmware/theme version readout to the modem panel.
- Added `version` / `ver` terminal commands.
- Boot sequence now uses configurable brand text and displays the installed theme version.
0.2.1
- Added the intended five-item default terminal menu when no WordPress menu is assigned: **About, Officers, Documents, Message, Login**.
- Existing WordPress pages with the slugs `about`, `officers`, `documents`, and `message` are used automatically when present.
- Replaced the fixed NODE/PORT/LINK subtitle with a dynamic terminal status bar.
- Added `statusbar on`, `statusbar off`, `statusbar minimal`, and `statusbar full` commands.
- Status-bar preference is stored locally in the visitor's browser.
- Minimal mode shows node, breadcrumb-style path, and current user.
- Full mode adds authentication/session context, live local time, and optional remote IP.
- Added session navigation breadcrumbs backed by `sessionStorage`.
- Added `history` and `nav history` commands to display the current browsing-session navigation history.
- Added `netinfo` for host, protocol, browser timezone/language, and optional server-observed remote IP.
- Visitor IP display is disabled by default and can be enabled from **Appearance → Customize → Terminal Settings**. The theme does not store the address.
- No browser geolocation is requested in this version.
- Preserved the v0.2.0 viewport, command-prompt, modem, menu-alias, and security behavior.
0.2.0
- Locked the entire physical terminal to the dynamic browser viewport.
- Made WordPress page content scroll internally instead of growing the page.
- Made command transcript history scroll independently.
- Pinned the command input at the bottom of the CRT.
- Removed the far-right fake cursor and restored an input caret that follows text.
- Added subdued internal scrollbar styling.
- Added WordPress submenu support with hierarchical numbers such as `1.1`.
- Added per-menu-item **Terminal command** and **Terminal aliases** fields in Appearance → Menus.
- Added direct resolution by number, label, slug, alias, or canonical command.
- Added `menu <item>`, `open <item>`, `go <item>`, `select <item>`, `?`, and item-specific help.
- Added optional `{username}`, `{display_name}`, and `{user_id}` placeholders in canonical command display strings.
- Preserved v0.1.1 modem behavior pending research against a specific real modem.
- No front-end write/editor functionality added.
0.1.1
- Added event-driven TX/RX behavior and serial indicator state handling.
0.1.0 — Initial information terminal
- Initial WordPress theme with retro telecommunications terminal appearance, CRT-style display, navigation, command interface, and modem-style indicator panel. Verified against the archived v0.1.0 theme package.
SYSTEM RECORD: FIRMWARE HISTORY
FIRMWARE CHANGELOG
INSTALLED FIRMWARE: V0.7.7.7-7a
DOCUMENTED RELEASE HISTORY:
v0.7.7.7-7a — National CWA-inspired footer refinement
- Widened the modern CWA footer content area and balanced the branding block against a three-column navigation area on large desktops, matching the national CWA footer’s overall proportions.
- Normalized footer heading, location/anniversary, search label, parent menu links and nested menu links with consistent Roboto typography and lighter menu weights.
- Preserved the single editable WordPress menu and its hierarchy. Each parent stays with its child links as the navigation flows across columns.
- Responsive layout: two navigation columns at medium widths, stacked branding/navigation on tablets, and a single navigation column on phones.
- Preserved the diagonal red graphic, configurable footer content, social links, search, copyright, firmware history link, signed-in π command toggle, and terminal appearance.
- Preserved the previously requested divider-free copyright area.
v0.7.7.7-6a — Editable unified CWA navigation
- The CWA top and bottom navigation now render from the same editable WordPress menu (Terminal Main Menu location).
- Each menu item has independent Show in CWA top / Show in CWA bottom checkboxes; both enabled by default.
- The first administrator visit seeds a CWA Main Navigation menu from the old fallback links only if no menu is assigned, leaving existing unassigned menus untouched.
- Added Appearance → CWA Menus with a direct Edit CWA Navigation Menu link and explanatory guidance.
- Main Menu is editable in the CWA menu; the retro terminal keeps its built-in [0] Main Menu without duplication.
- Existing menu labels, order, URLs, and login/logout behavior are preserved and managed via WordPress menu editing.
v0.7.7.7-5 — Smart image optimization and cleaner featured images
- Corrected modern CWA appearance featured-image rendering: remove terminal CRT sepia/grayscale/brightness filter, border, dark padding, and scanline overlay; retain retro effects in terminal appearance.
- Added independent **Hide displayed page/post title** editor checkbox on both posts and pages. WordPress title, SEO/browser metadata, and independently configured red/gray bands remain intact. H1 is visually hidden, not removed from accessibility structure, in modern CWA mode.
- Added **Media → CWA Image Optimizer** with Balanced (WebP quality 82), Maximum Compression (quality 72), and Lossless WebP presets, configurable output WebP or AVIF when Imagick codec is supported, optional maximum image width (1920 px default), and optional approximate target KB (quality floor 50).
- Added **Smart Optimize** actions in Media Library list, attachment editor/media modal, and bulk media actions (up to 50 items per batch). Generates separately registered optimized media attachments, preserving originals, captions, descriptions, alt text, ICC color profiles, and source/result size metadata. Does not replace featured-image references automatically.
- Existing **Create lossless WebP copy** action is preserved for backwards compatibility. WebP/AVIF encoder support depends on the host's Imagick build. Results and size reductions vary by source; optimization skips output larger than its source.
v0.7.7.7-4 — Footer layout, latest posts, lossless WebP
- CWA website footer now stays at the bottom of short browser pages by stretching the content area (not fixed/overlaid).
- Removed the thin separator above the copyright/firmware row, preserving the angled red footer background.
- Added Latest News & Updates immediately above the footer, with featured-image cards in a three-column desktop layout and a stacked mobile layout. Replaces the earlier homepage-only six-post news block to prevent duplicates.
- Theme Preferences > Latest News & Updates: enable/disable, homepage-only (default) or sitewide, editable heading, and post count (1–9, default 3).
- Each page/post has a CWA Latest News Display metabox with an override to hide the section on that record.
- Extended the CWA red title and gray subtitle band editor options to WordPress posts as well as pages.
- Media Library list view, attachment details, and bulk actions now offer a non-destructive lossless WebP conversion for JPEG and PNG media; creates a separate media attachment and retains the original. Requires Imagick with WebP support on the server. WordPress-generated derivative thumbnails may use standard compression.
v0.7.7.7-3 — Carousel navigation visibility preferences
- Add Appearance > Customize > CWA Homepage Slider > Show carousel navigation controls, enabled by default for desktop, and Hide carousel navigation controls on phones, enabled by default.
- On phones (up to 767px wide), hide the previous/next/pause/slide-count bar when the mobile preference is enabled and reclaim its reserved overlay spacing for the slide content. The desktop carousel is unchanged.
- Autoplay remains functional when the controls are hidden. With autoplay disabled and navigation hidden, only the initial slide will be visible until controls are re-enabled.
- Retain existing slide media, page banners, CWA appearance, and terminal functionality.
v0.7.7.7-2 — Footer firmware label and browser icon preference
- Replace the long modern CWA footer firmware/version-history text with a small, light-gray `FW v0.7.7.7-2` link anchored to the bottom-right of the footer, independently of the centered copyright line. The link still opens the complete firmware history.
- Add Appearance > Customize > Theme Appearance > Browser tab icon (favicon), allowing an optional square image upload from Media Library for both appearances. The existing WordPress Site Identity icon remains the fallback when the theme icon is unset.
- Keep terminal appearance, existing content modules, and CWA footer branding unchanged.
v0.7.7.7-1 — Homepage media carousel, page title bands, and firmware history
- Added an optional homepage media carousel with up to three image or MP4 slides selected from the WordPress Media Library through Appearance > Customize > CWA Homepage Slider.
- Configurable slide titles, descriptions, buttons, destinations, autoplay interval, pause/next/previous controls, reduced-motion support, and inline muted video playback. When no slide is configured, the previous static homepage hero remains unchanged.
- Added per-page CWA Page Header Settings in the WordPress page editor: optional full-width red H1 title band and light-gray H2 subtitle band, with custom text and italic subtitle option. Homepage bands follow the carousel; other page bands follow navigation.
- Added a public firmware history screen based on the bundled CHANGELOG.md, linked from the modem firmware readout, terminal footer, and CWA website footer. Older versions are listed as documented; missing versions are not fabricated.
- Preserved terminal styling and all existing member tools.
v0.7.7.7 — CWA footer design and preferences
- Match CWA-inspired website link styling with Roboto Medium, no underlines, and visible keyboard focus. Retro terminal remains unchanged.
- Reorganize the CWA website footer: optional uploaded footer brand graphic in place of text heading; editable heading, location, anniversary, link labels, search labels, and copyright through Appearance > Customize > CWA Website Footer. Existing brand settings remain the fallback.
- Move the footer search below the brand/social block, using a black magnifying-glass submit button and responsive full-width field.
- Retain angled darker-red footer, configured social icons, and signed-in π command toggle.
- Normalize website button styling without touching feature handlers.
v0.7.7.6 — CWA website search toggle fix
- Replaced the native search `<details>` disclosure with an explicitly controlled button and hidden search form to prevent the panel remaining visible or rendering over the masthead after a second tap on mobile Safari.
- Search now closes consistently on a second tap, outside tap, Escape, or appearance change, with proper `aria-expanded` state and no layout shift.
- Terminal appearance and all other features unchanged.
v0.7.7.5
- Raise the floating terminal settings cog 20 CSS pixels so it sits comfortably in the header instead of overlapping the CRT top border.
- Preserve absolute positioning, existing button styling, and both appearance modes without altering layout dimensions.
v0.7.7.4
- Harmonize typography in the CWA website appearance using Roboto with consistent weights, headings, body text, navigation, and footer.
- Normalize the three-line logo text and improve mobile hero headline wrapping and spacing.
- Keep the information terminal appearance and functional modules unchanged.
v0.7.7.3
- CWA appearance: hide redundant SUBSYSTEM/RECORD labels and divider, reduce masthead/page spacing, move page title and content higher.
- CWA message board: add visible Post New Message action (including for anonymous visitors, subject to posting settings).
- Events list: include past events in the current month, shown muted/gray and still accessible for details/minutes.
- Events list: add Next Month, and Current/Previous Month navigation as appropriate; retain existing 12-month preference and calendar views.
- Terminal appearance and message storage/moderation behavior are unchanged.
v0.7.7.2
- Use equal font size, weight, color and line spacing for all three CWA logo text lines, without a gap after the local number.
- Remove the redundant Public message board link from the CWA appearance's top red utility bar; the menu and footer links remain.
- Preserve the search, settings cog, footer, console, and terminal appearance from v0.7.7.1.
v0.7.7.1
- CWA-style website logo text now uses matching dark-grey Roboto SemiBold type for the Local name and federation subtitle, following the national CWA branding reference while preserving uploaded logo media.
- Converted the full utility-bar search field into a right-aligned magnifier disclosure, with accessible search form on activation, native no-JavaScript fallback, Escape/outside closing when JavaScript is available.
- Restyled CWA-style footer with angled darker-red overlay and white links; terminal appearance remains unchanged.
- Hid the CWA-view terminal command console by default for everyone. Signed-in users can open and close it with a subtle π control in the CWA footer. Guests cannot open it. Existing terminal-mode commands are unaffected.
v0.7.7
- Styled CWA website logo-adjacent text with Roboto SemiBold (600), red title, gray subtitle, improved tracking and spacing, responsive mobile sizing.
- Added customizable optional Facebook, X/Twitter, YouTube, Instagram, TikTok, Bluesky and LinkedIn profile links to the CWA top utility bar.
- Social icons only appear for valid configured profile URLs; inline SVGs require no plugin or bundled icon font.
- Added a compact search form to the CWA website top bar, using WordPress native search for published pages and posts, and a responsive search-results template.
- Retained terminal styling and existing settings cog behavior.
v0.7.6
- Display the standard settings cog in the CWA website appearance's existing utility bar, with white-on-red styling and no additional header height.
- Add Theme Appearance > Show settings cog (Terminal and CWA website), enabled by default.
- Hide terminal, CWA, and maximized settings controls when the option is disabled.
- Preserve the floating terminal cog positioning from v0.7.5.
v0.7.5
- Corrected the stylesheet cache version constant, which had remained at 0.7.2 and could cause the v0.7.4 cog to appear in the upper-left corner and add unwanted spacing.
- Anchored the compact, borderless settings gear absolutely to the upper-right of the terminal chassis, outside the layout flow, with a small in-page fallback style for cached CSS.
- Hide the regular cog in maximized and union modes; retain the dedicated fullscreen settings control.
v0.7.4
- Floated the settings cog directly over the terminal chassis rather than placing it inside the header flex layout; the cog no longer consumes header height or pushes the CRT border down on mobile.
- Removed the cog's outer circle, border, and background, replacing it with a compact standard gear icon.
- Kept the settings modal, keyboard focus, and maximized-terminal control behavior unchanged.
v0.7.3
- Reduced the settings cog to an icon-only control without the circular button outline so it no longer stretches or visually distorts the terminal header/border area.
- Kept the settings control aligned in both normal and maximized terminal modes while preserving keyboard accessibility.
0.7.2
- Replaced header appearance dropdowns with a settings cog and a shared accessible modal. The overlay contains appearance, terminal fullscreen, and native WordPress login/logout links; it remains available while the terminal is maximized.
- Added keyboard focus wrapping, Escape/backdrop/close-button dismissal, focus restoration, and guards so terminal shortcuts do not intercept settings interactions.
- Added a website-specific image logo and editable adjacent title/subtitle in Theme Appearance. Existing Site Identity logo/CWA wordmark and brand-name defaults are preserved.
- Added an optional setting to hide the entire CWA-style command console for logged-out visitors. Logged-in visitors and terminal appearance retain their console; WordPress access permissions are unchanged.
- Added a configurable terminal prompt label used for entry, command history, and restoration after credential prompts. Labels are plain text, limited to 32 characters, and retain the existing default when blank.
- Preserved v0.6.6 security fixes and the v0.7.1 dual-appearance behavior.
0.7.1
- Integrated the dual-appearance v0.7.0 feature into the v0.6.6 security baseline. Preserved narrow event permissions, shared order lookup throttling, sensitive-response cache controls, and explicit transcript withdrawal.
- Added the CWA-style website presentation alongside the existing terminal, with a Customizer default and optional remembered visitor preference. Upgrades continue to default to terminal.
- Added responsive website navigation, homepage, news, and footer over the same WordPress records and feature handlers. Switching preserves drafts without reloading or submitting forms.
- Labeled homepage/header/footer message-board destinations as public and clarified that confidential information should not be posted there.
- Preserved terminal keyboard handling while allowing native website keyboard navigation outside the console. No authentication or 2FA changes.
0.6.6
- Restricted native WordPress event administration to the same narrow event-management capability used by the terminal.
- Applied the shared order lookup limit to confirmation URLs as well as tracking; successful lookups no longer reset the attempt budget.
- Added private/no-store response headers and page-cache opt-out for authenticated pages and all Order Entry pages, plus no-store headers for theme REST responses.
- Added an explicit original-TXT withdrawal confirmation. Removing/replacing minutes with an original requires confirmation; withdrawing just the original preserves edited minutes. File ownership/type checks and deletion-failure reporting protect unrelated media and preserve retry information.
- Clarified that original uploads are public and editing displayed minutes does not redact the downloadable original.
- No authentication/2FA changes. Existing public downloads, old orphan uploads, backups, and external cached/downloaded copies require separate review.
0.6.5
- Added occurrence-specific meeting minutes to the Upcoming Events subsystem so each monthly meeting can have its own minutes even when one occurrence is moved.
- Admin/President/Executive Officer event managers can paste/edit minutes or upload a Zoom `.txt` transcript (max 2 MB). Uploaded text is imported into the terminal-readable minutes record and the original TXT can also be downloaded.
- Added public `VIEW MEETING MINUTES` links on event records when minutes exist.
- Added a public `MEETING MINUTES` archive view listing all event occurrences that currently have stored minutes.
- Added responsive terminal styling for long minutes/transcripts with wrapped text and no horizontal scrolling.
- Added controls to edit or remove an occurrence's existing minutes.
0.6.4
- Reworked Order Entry product cards on desktop into compact full-width rows with a medium thumbnail and product information beside it; mobile remains responsive.
- Added a privacy-safe 7-digit customer order lookup code generated for each order.
- Added public order-status lookup from Order Entry and terminal commands such as `track 4827316` and `order status 4827316`.
- Added restricted carrier/tracking-number fields for Administrators and President accounts, plus SHIPPED/PROCESSING/READY order states.
- Added customer-safe status output showing product, quantity, order state, carrier, and carrier tracking number without exposing contact information.
- Added WordPress email hooks for order confirmation/lookup code and shipping tracking updates. Mail delivery uses `wp_mail()` and will begin working automatically once host mail/SMTP is configured.
0.6.3
- Added optional cPanel/Namecheap AWStats integration using the account's existing AWStats aggregate data files; no cPanel credentials are stored in WordPress.
- Added `awstats`, `stats awstats`, `stats history`, and month-specific AWStats terminal output.
- `stats` now keeps the theme-local per-page counters and, when available, also shows a current-month AWStats summary.
- Added Terminal Settings controls to enable/disable AWStats reading and optionally override the AWStats domain name.
- Only aggregate counters are exposed to the terminal; raw IP addresses, user-agent records, and raw access logs are never exposed.
0.6.2
- Added `fullscreen` / `fs` commands with ON, OFF, and TOGGLE behavior using the same persistent display mode as the four-way-arrow control.
- Added `stats`, `visits`, and `pageviews` commands.
- Added lightweight aggregate per-page and site-wide page-view counters with no persistent visitor identity/IP/fingerprint data.
- Statistics identify themselves as local counters beginning with v0.6.2; host analytics remain the better source for historical/unique-visitor reporting.
0.6.1
- Added a WordPress-backed **Order Entry** subsystem available to public visitors.
- Added terminal product browsing with product picture, description, price, size/option choices, and quantity selection.
- Added public order-request submission with name, email, phone, optional notes, server-side validation, honeypot protection, and short privacy-preserving rate limiting. No payment credentials are collected.
- Added restricted Product Manager and Orders views for Administrators and President-role accounts only.
- Added terminal product create/edit/trash controls including image upload, sizes/options, price, maximum quantity per order, and availability.
- Added restricted order detail/status controls with NEW / REVIEWED / FULFILLED / CANCELLED states and WordPress Trash support.
- Added an `Order Entry` page/menu seeder and WordPress admin shortcuts for Product Manager and Orders.
- Added `order`, `shop`, `products`, `orders`, `product ...`, `RTRV-PROD`, `RTRV-ORD`, and `ENT-ORD` terminal commands.
- Replaced the always-visible command prompt with a **static navigation dock by default**. Interior `[ESC] BACK`, `[0] RETURN TO MAIN MENU`, and page-specific bottom actions now remain fixed in this dock.
- Added a persistent **π command control** that reveals/hides the command prompt and command-history drawer.
- Added a Terminal Settings option, **Show command prompt by default**, allowing the site-wide default to be command prompt or navigation dock.
0.5.2
- Added a Terminal Settings option for the Upcoming Events list range.
- `This Month` is now the default and shows events from today through the end of the current month.
- `Next 12 Months` preserves the previous long-range list behavior.
- Calendar View remains month-by-month.
0.5.1
- Added per-occurrence exceptions for recurring events. An officer can move or edit one meeting date/time/location/details without changing the recurring series.
- Added `EDIT / MOVE THIS OCCURRENCE` on recurring event records and `RESET THIS OCCURRENCE` for overridden dates.
- Recurring monthly-weekday series now display a specific rule such as `MONTHLY — SECOND TUESDAY` when derived from the series start date.
- Moved occurrences are generated on their override date while the original recurring slot is suppressed; later months continue following the original series rule.
- Reworked the calendar to scale to the CRT width with seven fluid columns instead of forcing a minimum desktop width.
- Added compact mobile weekday labels, event-title truncation, fluid cell sizing, and overflow guards to avoid horizontal scrolling.
- Hardened event forms for narrow/mobile CRTs so date/time/select/textarea controls shrink within the terminal instead of overflowing.
0.5.0
- Added a WordPress-backed **Upcoming Events** terminal subsystem with public read-only access.
- Added list and month-calendar views inside the CRT.
- Added terminal event create/edit/trash forms for Administrators, President, and Executive Officer roles.
- Added recurring series support: weekly, monthly by date, monthly by weekday position, and yearly, with optional end date.
- Added `events`, `calendar`, `event new`, `event <record>`, `event edit <record>`, `event delete <record>`, `RTRV-EVT`, and `ENT-EVT` commands.
- Added a private `Local Events` WordPress admin record type as a fallback management interface.
- Added a one-time seed for the `Upcoming Events` page and, when a custom Terminal Main Menu is already assigned, a one-time menu item addition.
- Updated the built-in fallback main menu to **About, Message, Documents, Upcoming Events, Login/Log Out**.
0.4.9-1
- Clarified message-board reply-count badges by displaying `REPLIES: N` instead of a bare number.
- Preserved officer/high-priority badge colors and hid badges when reply count is zero.
0.4.9
- Renamed the default chassis title to `CWA LOCAL 13552 - INFORMATION TERMINAL`.
- Removed the NODE label from the visible status/breadcrumb line to preserve portrait-width space for PATH and USER information.
- Added a Terminal Settings `Main Menu Page` selector; `[0] RETURN TO MAIN MENU`, `HOME`, `MAIN`, login/logout returns, and fallback navigation now use that configured destination.
- Made the configured Main Menu page the breadcrumb/session-history root. Returning to it resets the visible PATH to `MAIN MENU`, preventing stale paths such as `ABOUT > HOME`.
- Breadcrumbs now derive their current record from the actual requested page rather than a hard-coded HOME prefix.
0.4.8
- Preserve terminal display maximize mode across normal WordPress page navigation for the current browser/tab session.
- Restoring the display clears the remembered maximized state, so later navigation stays in normal mode.
0.4.7
- Fixed the CRT maximize/restore control being covered by higher-z-index terminal content, making clicks unreliable.
- Enlarged the light-gray pixel fullscreen icon and removed its visible button border/background while preserving a large click/tap target.
- Added a Terminal Settings option to show the header SOUND ON/OFF button; the control is hidden by default.
- SOUND, MUTE, and UNMUTE commands continue to work even when the visual sound button is hidden.
0.4.4
- Interior terminal records now open scrolled to the top instead of jumping to bottom navigation controls.
- Local page actions no longer preselect during initial render; the first arrow key press establishes selection.
- Internal CRT scroll position is reset after layout and on browser page-show events, while URL hash navigation is preserved.
0.4.3
- Restore Gutenberg/classic content alignment inside the CRT, including left/right image floats with paragraph wrapping.
- Preserve centered, wide, and full-width image behavior without overflowing the terminal display.
- Add terminal-friendly support for captions, Columns, Media & Text, blockquotes, lists, and separators.
- Stack floated/media layouts on narrow screens to keep mobile text readable.
0.4.2
- Fixed officer reply visibility by making the Message page/comment relationship the source of truth; terminal rendering no longer requires private theme metadata to exist.
- Added detailed sanitized `REPLY_*` diagnostic events so failed officer replies can be distinguished from display/sync problems.
- President/Executive Officer roles are recognized directly for message moderation even before a role-editor plugin has copied the custom capability.
- Comments and replies created from the normal WordPress Comments UI now appear automatically in the terminal message board.
- WordPress-admin-created officer replies inherit role-aware `ADMIN REPLY`, `OFFICIAL REPLY FROM PRESIDENT`, or Executive Officer identity and participate in officer pinning/President-replied indicators.
- Added support for nested WordPress comment replies by flattening them into chronological terminal subrecords under the correct top-level message record.
- Individual direct or nested reply subrecords can be edited or moved to WordPress Trash from the terminal by authorized moderators.
- Reply action labels now include the exact subrecord identifier being edited/trashed.
0.4.1
- Added moderator editing for individual top-level message records and individual reply subrecords.
- Added per-reply Move to Trash controls without removing the parent thread.
- Displayed every reply as a thread-local subrecord such as `0021.01`, while preserving chronological subrecord numbering even when officer replies are pinned.
- Pinned President replies first and Executive Officer replies second in the reply display.
- Added `PRESIDENT REPLIED` indicators on message detail and message-board list entries when an approved President reply exists.
- Added `login window` (also `login wp` / `login wordpress`) to open the normal WordPress login form in a popup so browser password managers can save/fill credentials.
- Preserved the secure in-terminal `login` flow as the default.
0.4.0 — Terminal authentication and password changes
- Added a native terminal login flow: `login` and the Login menu item prompt for username and password directly inside the CRT instead of redirecting to `wp-login.php`.
- WordPress still performs authentication server-side with `wp_signon()`; the theme never hashes or validates passwords in JavaScript.
- Password input is masked and credential values are never written to terminal history, debug logs, localStorage, or sessionStorage.
- Added short server-side rate limiting and same-origin/nonce validation for terminal login attempts.
- Added `passwd`, `password`, and `change password` commands for authenticated users.
- Password changes require the current password, a new password, and confirmation; the new password must be at least 8 characters.
- Successful password changes end the current WordPress session and return the visitor to the terminal to log in again.
- Escape cancels either credential workflow and securely clears the temporary in-browser values.
- The normal WordPress Login URL remains the no-JavaScript fallback for the Login menu item.
0.3.9 — Recoverable message trash
- Moderator delete now moves the parent terminal message and its terminal replies to WordPress Comments → Trash instead of permanently deleting them.
- Updated the moderator action and confirmation UI to say `MOVE TO TRASH` / `CONFIRM TRASH`.
- After the action, the terminal reports `MESSAGE RECORD MOVED TO TRASH.`
- Trashed records can be restored or permanently deleted later from WordPress → Comments → Trash.
0.3.8 — Role-aware official replies
- Administrator/sysop replies now display as `ADMIN REPLY`.
- President-role replies display as `OFFICIAL REPLY FROM PRESIDENT`.
- President replies use a slow red-to-dark-red pulsing callout; reduced-motion users get a static red callout.
- Exec Officer / Executive Officer roles display as `OFFICIAL REPLY FROM EXECUTIVE OFFICER`.
- Reply type and label are saved as comment metadata at posting time so old replies retain their original classification if roles later change.
- Existing President and Exec Officer role slugs receive the narrow `moderate_local_messages` capability automatically when present.
0.3.7 — Collapsible/resizable command history
- Command history now starts collapsed when empty, leaving only a compact history bar and the pinned command-entry row.
- The first transcript output automatically expands the history drawer.
- Added a top-right ▲/▼ toggle to expand/collapse command history.
- Added a draggable top resize edge; dragging upward increases history space and dragging downward decreases it.
- Remembers the preferred expanded history height locally while keeping each fresh page collapsed until output appears.
- `CLEAR`/`CLS` clears and collapses the history drawer again.
0.3.6 — Message diagnostics and same-origin submission fix
- Added an Administrator-only `debug` terminal command with a sanitized message-subsystem event log.
- Added `debug clear` to erase the diagnostic ring buffer and last browser-side message error.
- Message diagnostics never store message bodies, raw IP addresses, cookies, passwords, nonces, or user-agent strings.
- Message forms now submit to a same-origin relative `admin-post.php` endpoint to avoid proxy/SSL scheme mismatch failures.
- Removed the unnecessary custom fetch header from message submissions.
- Replaced the post-message nonce hard-stop with an explicit logged/redirected error so expired sessions return to the terminal instead of a WordPress error page.
- Administrators now see the actual HTTP status and a short sanitized response excerpt when a message POST fails.
- Added server-side logging for post start, validation rejection, comment insertion, redirects, and caught exceptions.
0.3.5 — Centered public-access boot screen + message transmit recovery
- Centers the boot dialog against the dynamic viewport on mobile and desktop, including iOS safe-area handling.
- Keeps the startup sequence through `CONNECT 115200`, then shows a generic public-access warning instead of the Local/date/firmware block.
- Uses a 303 POST/Redirect/GET response for message mutations and removes double-encoding from message redirect query arguments.
- Adds a server-side redirect fallback page so a host/plugin that prevents normal redirect headers cannot leave the visitor on a blank `admin-post.php` response.
- Message submit/moderation forms now use a same-origin fetch guard when JavaScript is available and explicitly navigate back to the terminal after a successful response; no-JavaScript native POST remains supported.
0.3.4 — Page title suppression
- Suppresses the visible WordPress page title on standard terminal Pages (including About, Documents, Officers, and other Pages) while preserving an accessible H1 for screen readers and document semantics.
- Keeps the terminal-owned `RECORD:`/subsystem label as the visible page identifier, eliminating redundant duplicate headings.
- Preserves the custom home-screen heading, 404 heading, post/article headings, and all v0.3.3 message-board behavior.
0.3.3 — Message board footer action + heading suppression
- Suppresses the normal visible WordPress page title on the Message subsystem while keeping an accessible H1 for screen readers.
- Moves `[1] NEW MESSAGE` into the Message board's bottom action row beside `[ESC] BACK` and `[0] RETURN TO MAIN MENU`.
- Message records begin at `[2]` so the New Message key remains stable even though the action is visually at the bottom.
- Adds the reusable Gutenberg CSS class `terminal-hidden` for intentionally hiding individual blocks from the terminal frontend.
0.3.2 — Main-menu boot guard
- Added `[0] MAIN MENU` as the first selectable record on the terminal home screen while preserving the existing WordPress menu numbering beginning at `[1]`.
- Added direct `0`, `main`, `main menu`, and `home` routes back to the terminal root where they do not conflict with an interior page's local `[0]` return control.
- Fixed the initial boot-screen Enter event leaking through to the highlighted menu underneath; Enter now dismisses the boot overlay without immediately opening About.
- Preserved all v0.3.1 message-board, navigation, authentication, and layout behavior.
0.3.1 — Message Board v1
- Message textarea inset 4px on both sides and uses border-box sizing to prevent clipping.
- Left/Right arrow keys now navigate terminal choices along with Up/Down.
- Added a WordPress-backed terminal message board for the Page slug `message`.
- Guests can post without an account, name, or email and are displayed as `ANONYMOUS`.
- Logged-in posters automatically use their WordPress display name.
- Messages and official replies include site-local timestamps.
- Added moderator actions: Acknowledge, Official Reply, and Delete with a separate delete-confirmation screen.
- Added the narrow `moderate_local_messages` capability; Administrators receive it automatically and individual officer accounts can be granted it from the WordPress user profile.
- Stored board records as ordinary WordPress comments so administrators can also manage them from the standard Comments screen.
- Added anonymous-posting and hold-for-moderation settings under Appearance → Customize → Terminal Settings.
- Added nonce validation, a hidden honeypot, server-side sanitization, a 1000-character limit, and short rate limiting for public posting.
- Anonymous message records do not persist the visitor IP or browser User-Agent in comment data; a salted transient hash is used only for rate limiting.
- Extended local terminal selection to form buttons, allowing moderator actions and transmit buttons to work with Up/Down + Enter and numeric selection.
- Added `message new`, `message <record>`, `RTRV-MSG::ALL;`, `RTRV-MSG::<record>;`, and `ENT-MSG;` command shortcuts.
0.2.9-2
- Made `[ESC] BACK` a first-class selectable local terminal choice.
- Up/Down now moves through BACK and `[0] RETURN TO MAIN MENU` instead of skipping BACK.
- Enter on the highlighted BACK choice performs browser-history Back, with the home screen as fallback.
- Styled the `[ESC]` marker with the same red terminal-choice marker used by numbered items.
0.2.9-1
- Expanded the automatic interior-page navigation row to show `[ESC] BACK [0] RETURN TO MAIN MENU`.
- The Back control is clickable and mirrors the Escape-key behavior; if there is no useful prior browser entry, it falls back to the terminal home screen.
- Preserved the existing zero-key main-menu behavior, local page-link navigation, and v0.2.9 console sizing.
0.2.9
- Added an automatic `[0] RETURN TO MAIN MENU` choice at the bottom of normal interior pages/posts.
- The return choice participates in the same local page navigation as document links: Up/Down + Enter, click/tap, the `0` key, or typing `0` at the command prompt.
- The 404 page keeps its existing dedicated return control and does not receive a duplicate `[0]` link.
- Reduced the command console from the v0.2.8 maximum of 190px to 130px, leaving the 50–58px input strip unchanged and reducing the visible transcript/history area by roughly half on desktop.
- Preserved internal transcript scrolling, local document numbering, and the fixed-bottom command entry.
0.2.8
- Added automatic terminal numbering for ordinary links inside WordPress page/post content.
- Page links render as `[1]`, `[2]`, `[3]`, etc. without requiring the editor to type the numbers manually.
- On content pages, Up/Down selects the local numbered links and Enter opens the highlighted link.
- Number keys 1-9 open the matching local link when the command input is not active.
- Typing a local link number into the command line (including multi-digit numbers such as `10`) opens that link.
- Local page-link numbers take precedence over main-menu numbers while viewing that page, preventing `1` on Documents from unexpectedly opening the site's About menu item.
- Gutenberg File blocks are de-duplicated so their separate Download button does not become a second numbered record.
- Added `terminal-no-select` as an opt-out class for links that should not participate in terminal numbering/navigation.
0.2.7
- Changed the built-in default menu to **About, Message, Documents, Login/Log Out**.
- Menu item 4 is session-aware: public visitors see **Login**; authenticated WordPress users see **Log Out**.
- Selecting item 4 uses WordPress's native login/logout URLs and nonce-protected logout flow.
- A configured WordPress menu item named/commanded Login or Logout is also automatically rendered for the current authentication state.
- The `login` command now reports an already-authenticated session instead of sending a logged-in user back to the login screen.
0.2.6
- Fixed the hidden-CRT-header grid regression that could make the command entry appear to vanish.
- Explicitly pins the optional CRT brand header to row 1, WordPress content to row 2, and the terminal console to row 3.
- The command console now remains in the bottom CRT track whether the brand header is on or off.
- Preserves the full-height clickable input strip and internal transcript scrolling from v0.2.5.
0.2.5
- Fixed the v0.2.4 command input regression where the visible text field could collapse to a thin strip.
- Reserved a dedicated 50–58px command-entry track at the bottom of the CRT.
- Made the actual text input fill the full height and width of the entry row.
- Kept the entire entry strip clickable/tappable and preserved the pinned-bottom console behavior.
- Kept transcript scrolling independent from the command-entry row.
0.2.4
- Made the command console occupy an explicit bottom CRT grid track so it remains physically pinned to the bottom even when page content is very short.
- Kept the transcript scrollable inside that fixed console area.
- Increased the command-entry row to a touch-friendly target and made the entire row clickable/tappable to focus the command input.
- Added subtle hover/focus feedback to the command-entry surface without changing the terminal aesthetic.
- Preserved the real input caret and all v0.2.3 status/header behavior.
0.2.3
- The three-line brand/header block inside the CRT is now hidden by default, freeing more screen space for page/menu content.
- Added `header on`, `header off`, and `header default` terminal commands (`screenheader` is also accepted).
- Header visibility preference is stored locally in the visitor's browser.
- Added **Show CRT brand header by default** under Appearance → Customize → Terminal Settings for a site-wide default.
- The chassis title and dynamic `statusbar` remain independent and unchanged.
0.2.2
- Added editable home-screen and terminal-brand text under Appearance → Customize → Terminal Settings.
- Added dynamic firmware/theme version readout to the modem panel.
- Added `version` / `ver` terminal commands.
- Boot sequence now uses configurable brand text and displays the installed theme version.
0.2.1
- Added the intended five-item default terminal menu when no WordPress menu is assigned: **About, Officers, Documents, Message, Login**.
- Existing WordPress pages with the slugs `about`, `officers`, `documents`, and `message` are used automatically when present.
- Replaced the fixed NODE/PORT/LINK subtitle with a dynamic terminal status bar.
- Added `statusbar on`, `statusbar off`, `statusbar minimal`, and `statusbar full` commands.
- Status-bar preference is stored locally in the visitor's browser.
- Minimal mode shows node, breadcrumb-style path, and current user.
- Full mode adds authentication/session context, live local time, and optional remote IP.
- Added session navigation breadcrumbs backed by `sessionStorage`.
- Added `history` and `nav history` commands to display the current browsing-session navigation history.
- Added `netinfo` for host, protocol, browser timezone/language, and optional server-observed remote IP.
- Visitor IP display is disabled by default and can be enabled from **Appearance → Customize → Terminal Settings**. The theme does not store the address.
- No browser geolocation is requested in this version.
- Preserved the v0.2.0 viewport, command-prompt, modem, menu-alias, and security behavior.
0.2.0
- Locked the entire physical terminal to the dynamic browser viewport.
- Made WordPress page content scroll internally instead of growing the page.
- Made command transcript history scroll independently.
- Pinned the command input at the bottom of the CRT.
- Removed the far-right fake cursor and restored an input caret that follows text.
- Added subdued internal scrollbar styling.
- Added WordPress submenu support with hierarchical numbers such as `1.1`.
- Added per-menu-item **Terminal command** and **Terminal aliases** fields in Appearance → Menus.
- Added direct resolution by number, label, slug, alias, or canonical command.
- Added `menu <item>`, `open <item>`, `go <item>`, `select <item>`, `?`, and item-specific help.
- Added optional `{username}`, `{display_name}`, and `{user_id}` placeholders in canonical command display strings.
- Preserved v0.1.1 modem behavior pending research against a specific real modem.
- No front-end write/editor functionality added.
0.1.1
- Added event-driven TX/RX behavior and serial indicator state handling.
0.1.0 — Initial information terminal
- Initial WordPress theme with retro telecommunications terminal appearance, CRT-style display, navigation, command interface, and modem-style indicator panel. Verified against the archived v0.1.0 theme package.
[0] RETURN TO MAIN MENU